Details
No minimum load electronic transformer.
- Works with DC LED or Halogen Incandescent low voltage lamps
- Soft Start
- UL recognized
- UL recognized/listed Class 2 power supply, meets UL 2108 requirements
- Short circuit protection
- Auto reset and thermal protection
- Soft start technology
- Fully ELV dimmable
- Low profile, small compact design
- Advanced no load technology
- IP67 rating
- Isolated output power per NEC and UL safety requirements
- Advantages of electronic transformers
-
- Low cost
- High frequency output -> smaller size
- Lighter
- Not prone to flicker like magnetic transformers
- Auto-reset means they do not require circuit breakers like magnetic transformers
- No minimum load required -> convenient
- Higher efficiency -> operate at a lower temperature
- Available with line filtering for lower conducted and radiated electrical emissions
- Where to use electronic transformers
-
- Locations that have limited space
- Locations that are heat sensitive
- Residential
- Locations requiring low weight setup
- Locations that may require a transformer to be set up away from the source (or close to load)
- Disadvantages/When not to use
-
- Don't use if the location is known to have high temperatures
- Electronic transformers are heat sensitive
- May have audible noise
- Can be resolved with transformer relocation
- Shorter lifespan (~5-6 yrs)
- Requires loads to be compatible with high-frequency voltages
- Usually may not work with cheaper LED loads
- Don't use if the location is known to have high temperatures
Additional Information
Color | Black |
---|---|
Warranty | Manufacture's 3 Year Limited |
Important Note | This is a DC transformer, read the specs carefully |
Primary Breaker | No |
Secondary Breaker | No |
Circuits | Single |
Terminal Block | No |
Dimmable | Yes - see details |
Cross Reference Number | TA300WD12 |
Approvals | IP67, UL |
Max Load Wattage | 300 |
Min Load Wattage | 0 |
Input Voltage | 120VAC |
Electric Current Type | DC |
Dimensions H x W x L (in) | 4.09" (104.1mm) x 3.2" (81.3mm) x 1.55" (39.4mm) |