LTF 75watt no load electronic AC driver transformer 12VAC ELV dimmable 7" leads TA75WA12-0007

# TA75WA12-0007

Be the first to review this product

LTF 75watt no load electronic AC driver transformer. Compact, low profile, small form factor easy to use design with 7" wire leads. Great for powering lighting applications that use Halogen or Incandescent light bulbs. See specification sheet for more information. TA75WA12-0007

Designer's Note

No-load electronic transformers can only be bench tested with devices capable of measuring at higher frequencies such as a Fluke 289 or better voltage meter. No-load can be measured this way with or without a load on the device. The reason for this is a lower end meter standard electricians field meter would measure voltage that are DC or < 50-60 Hz only and not this transformer.

Measurements done with a field voltage meter will give an incorrect reading or no reading at all. Please be aware of this when testing the transformer. The no-load is designed for both LED Loads, and halogen / Incandescent bulbs.

However, for standard halogen lighting loads a no-load transformer is not necessary. Total lighting supply offers a video on testing standard transformers. Request the video and we will send it to you.

No-Load transformers can be full loaded to the load specifications. However we cannot guarantee full load performance if your circuit is not engineered correctly for lighting loads, lamp type or wire gauge and length. Proper project engineering is required or downgrading the load on the transformer may be a option.

Example: With a 300watt transformer, one single run at 300watts may required a #10 gauge wire depending on the distance.
Low voltage wire when used on some loads have voltage loss based on load type, wire size and distance from the transformer. Splitting the load when available may be a good option as the amperage at full load is very high.

Feel free to contact us on time sensitive or AIR orders before you place the order

Availability: Typically ships same or next business day!

$19.18
Details
No minimum load electronic transformer.
  • Works with AC Halogen or AC Incandescent low voltage lamps
  • ETL, UL recognized
    • UL recognized/listed Class 2 power supply, meets UL 2108 requirements
  • Short circuit protection
  • Auto reset and thermal protection
  • Soft start technology
  • Fully ELV dimmable
  • Low profile, small form factor
  • Advanced no load technology
  • High power factor
  • 7" wire leads
  • IP 60 rating
  • Isolated output power per NEC and UL safety requirements
Additional Information
Color Black
Warranty Manufacture's 3 Year Limited
Important Note Feel free to contact us on time sensitive or AIR orders before you place the order
Primary Breaker No
Secondary Breaker No
Circuits Single
Terminal Block No
Dimmable Yes - see details
Approvals cULus, ETL, FCC, RoHS
Max Load Wattage 75
Min Load Wattage 0
Input Voltage 120VAC
Output Voltage 12VAC
Electric Current Type AC
Dimensions H x W x L (in) 0.82" (21mm) x 1.30" (33mm) x 2.66" (67.5mm)
You may also be interested in the following product(s)
Product Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

LTF 75watt no load electronic AC driver transformer 12VAC ELV dimmable 7" leads TA75WA12-0007
LTF 75watt no load electronic AC driver transformer. Compact, low profile, small form factor easy to use design with 7" wire leads. Great for powering lighting applications that use Halogen or Incandescent light bulbs. See specification sheet for more information. TA75WA12-0007
$19.18